Dinoer Technology Explains The Fundamental Principles Of Cathodic Protection At The Langfang Pipeline Expo

Apr 22, 2026

Dinoer Technology Explains the Fundamental Principles of Cathodic Protection at the Langfang Pipeline Expo

Today at the Langfang International Pipeline Expo, the technical team from Dinoer Technology Company conducted several in-depth presentations on cathodic protection technology. Many of the visitors to their booth were frontline pipeline project engineers, and the most discussed question was: how exactly does cathodic protection prevent corrosion on oil pipelines?

Simply put, metal corrosion is an electrochemical process. When a bare steel pipe is buried underground, differences in oxygen concentration, moisture, and soil resistivity across its surface create a difference in electrical potential. The areas with lower potential become anodes, where iron atoms lose electrons and become iron ions, and the pipeline begins to rust. Cathodic protection works in the opposite way. It continuously supplies electrons from an external source to the pipeline, lowering the entire pipe's potential to a uniformly negative level. All parts of the pipeline become cathodes, and the corrosion reaction is forcibly suppressed.

7ac074dafbe65577da2570d8f62830b

In engineering practice, there are two ways to achieve cathodic protection. The first is the sacrificial anode method. A piece of metal with a more negative potential, such as magnesium alloy or zinc alloy, is connected to the pipeline. This metal preferentially loses electrons and consumes itself, thereby protecting the pipeline. This method is simple and reliable, requires no external power supply, and is suitable for short pipelines, tank bottoms, or areas without access to grid electricity. However, its disadvantages include a limited driving voltage, a short protection distance in high-resistivity soils, and the need to replace the anode after it is consumed.

The second method is the impressed current method, which uses an external direct current power source to forcefully apply a negative charge to the pipeline. This system includes a potentiostat, an auxiliary anode ground bed, and a reference electrode. The potentiostat is the core device; it continuously monitors the pipe's protection potential and automatically adjusts the output current. The auxiliary anode is typically made of high-silicon cast iron or mixed metal oxide coated titanium, buried in a ground bed to release current into the earth. The reference electrode acts as the "eye," placed in the soil near the pipeline to provide real-time potential data.

A key parameter to mention here is the minimum protection potential. According to Chinese national standards, the cathodic protection potential for buried steel pipelines in soil must reach at least negative zero point eight five volts, measured against a copper-copper sulfate reference electrode. A potential more positive (less negative) than this value means inadequate protection, and the pipeline may still corrode locally. However, if the potential is too negative, exceeding negative one point two volts, it can cause the coating to disbond or even lead to hydrogen-induced cracking. Therefore, a qualified cathodic protection system does not simply apply current; it must precisely control the potential within the window of negative zero point eight five volts to negative one point two volts.

The experience Dinoer Technology has accumulated over the years in the cathodic protection field is this: while the principle seems simple, the implementation is full of details. How to measure soil resistivity, how to arrange the auxiliary anode ground bed, and how to mitigate stray current interference each affect the final protection result. At this expo, Dinoer has prepared a special technical document titled "Common Misconceptions in Cathodic Protection Design," available for free at their booth.

You Might Also Like