
Ir-Ta Titanium Anode for Electrolytic Copper Foil
As one of the basic materials in the electronic industry, electrolytic copper foil is mainly used to manufacture printed circuit boards (PCB), copper clad laminates (CCL), etc., and is widely used in home appliances, communications, computing (3C) industries, etc. In recent years, due to the...
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Electrolytic Copper Foil Production: Role of Iridium-Tantalum Coated Titanium Anodes
Electrolytic copper foil is a fundamental material in the electronics industry. It is primarily used to manufacture printed circuit boards (PCB) and copper clad laminates (CCL). From home appliances and communication devices to computing equipment (the 3C industries), copper foil is everywhere.
In recent years, the electronics industry has pushed for higher density, lighter weight, thinner profiles, and smaller components. This shift has created new demands for copper foil:
Low – low surface roughness
Thin – foil thickness developing toward less than 12 microns
High – high physical performance and reliability
No – no surface defects
Electrolytic copper foil is considered a copper processing product with a relatively high technical barrier.
How Electrolytic Copper Foil Is Made
Although different manufacturers may adjust specifications and performance, the core manufacturing process remains largely the same.
Raw materials – electrolytic copper or waste copper wire with purity equal to that of electrolytic copper – are dissolved in sulfuric acid to produce a copper sulfate aqueous solution. A metal rotating drum acts as the cathode. Through an electrolytic reaction, metallic copper continuously deposits onto the surface of this cathode drum and is then continuously peeled off. This is called the green foil electrolysis process.
The side that is peeled from the cathode – the smooth side – becomes the surface visible on the final laminate or PCB. The opposite side, often called the rough side, undergoes a series of surface treatments to improve bonding with the resin of the PCB substrate.
Electrolysis Principle Explained
During electrolysis, cations in the electrolyte move to the cathode, where they gain electrons and are reduced. Anions move to the anode, lose electrons, and are oxidized.
When two electrodes are placed in a copper sulfate solution and connected to a direct current power supply, copper and hydrogen deposit on the plate connected to the cathode. If the anode is made of copper, copper dissolution and oxygen evolution occur simultaneously.
The chemical reactions are as follows:
Cathode reactions:
Cu²⁺ + 2e⁻ → Cu (copper deposition)
2H⁺ + 2e⁻ → H₂↑ (hydrogen evolution)
Anode reactions:
4OH⁻ – 4e⁻ → 2H₂O + O₂↑
2SO₄²⁻ + 2H₂O – 4e⁻ → 2H₂SO₄ + O₂↑
Copper dissolved from the anode replenishes copper ions consumed in the electrolyte. After proper surface treatment of the cathode, the deposited copper layer can be peeled off, producing a copper foil of controlled thickness.
Typical Process Conditions for Copper Foil Production
| Parameter | Typical Range |
|---|---|
| Cu²⁺ concentration | 50–150 g/L |
| H₂SO₄ concentration | 60–150 g/L |
| Cl⁻ concentration | 30–60 ppm |
| Additives | 2–5 ppm |
| Operating temperature | 50–80°C |
| Current density | 5,000–10,000 A/m² |
| Anode service life | More than 8 months |

Anode Type Used in Copper Foil Production
The anode is typically plate-shaped and made of iridium-tantalum coated titanium (Ir-Ta MMO anode). This type of anode is specifically designed for the aggressive sulfuric acid environment of copper foil production.
Size can be fully customized according to the customer's specific equipment design requirements.
Advantages of Ir-Ta Coated Titanium Anode for Electrolytic Copper Foil
Electrolytic copper foil manufacturers who switch to or start with Ir-Ta titanium anodes can expect the following benefits:
1. Stable electrode spacing
The anode maintains its dimensional shape over long production runs. This ensures consistent current distribution across the entire cathode drum surface.
2. Increased production capacity
Because the anode remains stable and does not deform, uptime increases. Less maintenance means more production hours.
3. High current carrying capacity with uniform distribution
The iridium-tantalum coating allows the anode to carry high current densities (up to 10,000 A/m² or more) while maintaining even current distribution. This directly improves production efficiency.
4. Faster copper foil deposition
Uniform current distribution allows the cathode drum to pick up copper at a more consistent and faster rate, producing thicker foil in less time or thinner foil with better uniformity.
5. Lower energy consumption
The mixed metal oxide coating has a low oxygen overpotential, meaning less voltage is required to drive the electrolysis reaction at the same current density. This reduces electricity costs per kilogram of copper foil produced.
6. Long working life – more than 8 months
These anodes are designed to operate continuously for over eight months in typical copper foil production conditions. Even when the coating eventually depletes, the titanium substrate can be stripped and recoated with fresh Ir-Ta oxide, extending the total service life significantly.
Summary
For electrolytic copper foil manufacturers facing demands for thinner, smoother, and more reliable products, the choice of anode directly affects foil quality and production cost. Iridium-tantalum coated titanium anodes provide:
Stable operation under high current density (5,000–10,000 A/m²)
Uniform copper deposition for consistent foil thickness
Long working life – over 8 months with recoating option
Lower energy consumption compared to traditional lead or uncoated anodes
When selecting or replacing anodes for a copper foil production line, pay attention to the coating composition (Ir-Ta), anode shape (plate), and compatibility with your electrolyte chemistry (Cu²⁺ 50–150g/L, H₂SO₄ 60–150g/L, Cl⁻ 30–60ppm, 50–80°C). A properly designed titanium anode with iridium-tantalum coating will deliver stable production and lower total cost of ownership.
Hot Tags: ir-ta titanium anode for electrolytic copper foil, suppliers, manufacturers, factory, customized, buy, price, quality, pricelist, in stock, for sale, Titanium Anode for Electrolytic Copper Foil, Ir Ta Titanium Anode for Electrolytic Copper Foil, Ir-Ta Titanium Anode for Electrolytic Copper Foil, FIP Titanium Anode for Copper Foil Electrolysis
No Information






